Controls And Display Elements; Control Panel - HAKO Scrubmaster B75R Operating Manual

2.2

Controls and display elements

2.2.1

Control panel

The individual functions of the buttons on the control panel are described
below. The respective activated functions are visible as corresponding
symbols in the display panel.
Key switch Fig. 5-40
The electrical system is switched on and off with the key switch.
• Position 0: The electrical system is switched off. The key can be pulled out.
• Position 1: The electrical system is switched on.
• The software version is displayed for approx. 1 second in the number field
Fig. 6-47, possibly followed by the last service code for approx.
3 seconds. The operating hours meter is then displayed.
• The current charging state of the batteries is displayed in the BMS display
panel Fig. 6-51.
Driving direction selector switch Fig. 5-39
The driving direction is selected with the driving direction selector switch.
Only select a driving direction when the machine is at standstill.
• Gear lever forwards: Forwards gear
• Gear lever 0: Neutral position
• Gear lever backwards: Reverse gear
Note
A warning signal is output when in reverse gear. The maximum
speed when reversing is half of the maximum speed when driving
forwards.
02-7175-00-00.fm
Operation
25