GLP Light Operator 48 User Manual page 6

1. Overview
1.1 Front View
1. Preset A LEDs
2. Channel Sliders 1-24
3. Flash Buttons 1-24
4. Preset B LEDs
5. SCENE LEDs
6. Channel Sliders 25-48
7. Flash Buttons 25-48
8. Dark Button
9. Down/Beat Rev
10. Mode Select/Rec Speed
11. Up/Chase Rev
12. Page Button
13. Delete/ Rev One
14. Segment Display
15. Insert / % or 0-255
Show the current intensity of the relevant channel numbered
from 1 to 24.
These 24 sliders are used to control and /or program the
intensities of channels 1-24.
These 24 buttons are used to bring an individual channel,
to full intensity.
Show the current intensity of the relevant channel numbered
from 25-48.
Light when relevant scenes are active.
These 24 sliders are used to control and /or program the
intensities of channels 25-48.
These 24 buttons are used to bring an individual channel,
to full intensity. They also are used for programming.
This button is used to momentarily black out overall output.
DOWN functions to modify a scene in Edit mode;
BEAT REV is used to reverse the chasing direction of a
program with regular beat.
Each tap will activate the operating mode in the order:
CHNS /SCENES, Double Preset and Single Preset.
Rec Speed: Set the speed of any of the programs chasing
in Mix mode.
Up is used to modify a scene in Edit mode.
Chase Rev is to reverse the chasing direction of a scene
under Speed Slider control.
Tap to select pages of scenes from Page 1-4.
Delete any step of a scene or reverse the chasing direction
of any program.
Shows the current activity or programming state.
Insert is to add one step or steps into a scene.
% or 0-255 is used to change display value cycle between
% and 0-255.
4