GLP Light Operator 48 User Manual page 18

2. Operation Guide
2.2.6 Insert a Step or Steps
INSERT
EXAMPLE: Insert a step with channels 1-12 fully on at a time between
step 4 and step 5 of program 35.
1. Record enable.
2. Push Channel sliders 1-12 to the top and record the scene as a step.
3. Tap the Mode Select button to select CHNS
4. Tap the Page button until Page 2 LED lights.
5. Tap the Flash button 35 while holding down the Edit button, the corresponding
scene LED lights.
6. Tap the Step button to scroll to the step 4.
7. Tap the Insert button to insert the scene you've created before .
4. Tap the Insert button to insert the step you've
created before, all LEDs will flash, indicating
the step is inserted.
5. Exit Edit mode.
SCENE mode.
16