GLP Light Operator 48 User Manual page 7

1. Overview
1.1 Front View
16. Edit / All Rev
17. Add or Kill/ Rec Exit
18. Record/ Shift
19. Master A Button
20. Park Button
21. Hold Button
22. Step Button
23. Audio Button
24. Master Slider A
25. Master Slider B
26. Blind Button
27. Home Button
28. Tap Sync Button
29. Full On Button
30. Black Out Button
31. Fade Time Slider
32. Speed Slider
33. Audio Level Slider
34. Fog Machine button
5
Edit is used to activate Edit mode.
All Rev is to reverse the chasing direction of all programs.
In Add mode, multiple scenes or Flash buttons will be on
at a time.
In Kill mode, pressing any Flash button will kill any other
scenes or programs.
Rec Exit is used to exit from Program or Edit mode.
Record is used to activate Record mode or program a step.
Shift functions only used with other buttons.
Brings channel 1-12 to full of current setting.
Used to select Single/Mix Chase, bring Channel 13-24 to
full of current setting, or momentarily program a scene into
Master B slider, depending on the current mode.
This button is used to maintain current scene.
This button is used to go to next step when the Speed Slider
is pushed to the bottom or in Edit mode.
Activates audio sync of chase and audio intensity effects.
This slider controls overall output of all channels.
This slider controls the chase of all programs.
This function takes the channel out of the chase of a program
in CHNS /SCENE mode.
This button is used to deactivate the Blind.
Repeatedly tapping this button establish the chase speed.
This function bring overall output to full intensity.
This button is used to kill all output with exception for that
resulting from Flash and Full On.
Used to adjust the Fade Time.
Used to adjust the chase speed.
This slider controls the sensitivity of the Audio input.