Set Length Range For Plessey - Newland HR3250 Marlin User Manual

【Enter Setup】

Set Length Range for Plessey

The scanner can be configured to only decode Plessey barcodes with lengths that fall between (inclusive) the minimum
and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
【Set the Minimum Length (Default: 4)】
If minimum length is set to be greater than maximum length, the scanner only decodes Plessey barcodes
with either the minimum or maximum length. If minimum length is same as maximum length, only Plessey
barcodes with that length are to be decoded.
Set the scanner to decode Plessey barcodes containing between 8 and 12 characters:
1.
2.
3.
4.
5.
6.
7.
8.
9.
**【Exit Setup】
Scan the Enter Setup barcode.
Scan the Set the Minimum Length barcode.
Scan the numeric barcode "8". (See the "Digit Barcodes" section in Appendix)
Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Appendix)
Scan the Set the Maximum Length barcode.
Scan the numeric barcode "1".
Scan the numeric barcode "2".
Scan the Save barcode.
Scan the Exit Setup barcode.
【Set the Maximum Length (Default: 48)】
118