Save/Cancel Barcodes - Newland HR3250 Marlin User Manual

Save/Cancel Barcodes

After reading numeric barcode(s), you need to scan the Save barcode to save the data. If you scan the wrong digit(s), you
can either scan the Cancel barcode and then start the configuration all over again, or scan the Delete the Last Digit
barcode and then the correct digit, or scan the Delete All digits barcode and then the digits you want.
For instance, after reading the Maximum Length barcode and numeric barcodes "1", "2" and "3", you scan:
 Delete the Last Digit: The last digit "3" will be removed.
 Delete All Digits: All digits "123" will be removed.

Cancel: The maximum length configuration will be canceled. And the scanner still remains ready to read
programming barcode.
【Delete the Last Digit】
179
【Save】
【Cancel】
【Delete All Digits】