Set Length Range for MSI-Plessey
The scanner can be configured to only decode MSI-Plessey barcodes with lengths that fall between (inclusive) the
minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
【Set the Minimum Length (Default: 4)】
If minimum length is set to be greater than maximum length, the scanner only decodes MSI-Plessey
barcodes with either the minimum or maximum length. If minimum length is same as maximum length,
only MSI-Plessey barcodes with that length are to be decoded.
Set the scanner to decode MSI-Plessey barcodes containing between 8 and 12 characters:
1.
2.
3.
4.
5.
6.
7.
8.
9.
121
Scan the Enter Setup barcode.
Scan the Set the Minimum Length barcode.
Scan the numeric barcode "8". (See the "Digit Barcodes" section in Appendix)
Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Appendix)
Scan the Set the Maximum Length barcode.
Scan the numeric barcode "1".
Scan the numeric barcode "2".
Scan the Save barcode.
Scan the Exit Setup barcode.
【Set the Maximum Length (Default: 48)】
【Enter Setup】
** 【 Exit Setup】