Function Key Mapping - Newland HR3250 Marlin User Manual

【Enter Setup】

Function Key Mapping

When Function Key Mapping is enabled, function character (0x00 - 0x1F) are sent as ASCII sequences over the numeric
keypad.
1. CTRL Make
2. Press function key
3. CTRL Break
**【Disable Function Key Mapping】
Supposing the Function Key Mapping feature is enabled and other parameters of USB HID-KBW adopt
factory defaults, barcode data "A<HT>(i.e. Horizontal Tab)F" (0x41/0x09/0x46) is sent as below:
1. "A" - Keystroke "A".
2. "Ctrl I" - "Ctrl Make" + Keystroke "I" + "Ctrl Break"
3. "F" - Keystroke "F"
For some text editors, "Ctrl I" means italic convert. So the output may be "AF".
Emulate ALT+Keypad ON prevails over Enable Function Key Mapping.
**【Exit Setup】
【Enable Function Key Mapping】
50