Check Digit Verification; Set Length Range For Plessey - Newland BS80 User Manual

Check Digit Verification

Disable
Do Not Transmit Check Digit After Verification (default)

Set Length Range for Plessey

The scanner can be configured to only decode Plessey barcodes with lengths that fall between (inclusive)
the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum
lengths.
If minimum length is set to be greater than maximum length, the scanner only decodes Plessey barcodes
with either the minimum or maximum length. If minimum length is same as maximum length, only Plessey
barcodes with that length are to be decoded.
Set the Minimum Length
Example: Set the scanner to decode Plessey barcodes containing between 8 and 12 characters
1. Scan the Set the Minimum Length barcode.
Scan the numeric barcode "8" from the "Digit Barcodes (1D Scanner)" section in Appendix.
2.
Scan the Save barcode from the "Save/Cancel Barcodes (1D Scanner)" section in Appendix.
3.
4. Scan the Set the Maximum Length barcode.
Scan the numeric barcodes "1" and "2" from the "Digit Barcodes (1D Scanner)" section in Appendix.
5.
Scan the Save barcode from the "Save/Cancel Barcodes (1D Scanner)" section in Appendix.
6.
85
Transmit Check Digit After Verification
Set the Maximum Length