Newland HR3250 Marlin User Manual page 156

【Enter Setup】
If you want to remove the extraction option of a barcode type, follow the steps below:
1. Scan the Enter Setup barcode.
2. Scan the Erase the Extraction Option of a Symbology barcode.
3. Scan the ID number of the barcode type. (e.g. EAN-13, its ID number is 005. For more information, see the
"Symbology ID Number" section in Appendix)
4. Scan the Save barcode. (See the "Save/Cancel Barcodes" section in Appendix)
5. Scan the Exit Setup barcode.
**【Disable Extraction】
【Erase the Extraction Option of a Symbology】
【Enable Extraction】
【Erase the Last Extraction Option】
【Program Extraction Option】
【Erase All Extraction Options】
**【Exit Setup】 156