Parity Check - Newland HR3250 Marlin User Manual

Parity Check

Set the parity type to match the Host requirements. The default setting is No Parity.

Odd Parity: If the data contains an odd number of 1 bits, the parity bit value is set to 0.

Even Parity: If the data contains an even number of 1 bits, the parity bit value is set to 0.

None: Select this option when no parity bit is required.
【Even Parity】
41
**【None】
【Enter Setup】
【Odd Parity】
**【Exit Setup】