Newland HR3250 Marlin User Manual page 38

【Enter Setup】
Details of product information are described in the table below.
Item
Firmware Ver Firmware Version
Build Time Firmware Build Time
Device ID Device Type
App Ver Application Version
uIMG Ver uIMG Version
Date Manufacture Date
S/N Factory Serial Number
ESN User-defined Serial Number
Manufacture ID Device Name
Interface TTL-232 (EM3000) or RS-232 (EM2027), baud rate, parity check, data bit, stop bit.
Indicate reading 1D is allowed. Enabled symbologies are separated by a comma. Additional
information includes:
1.
1D
2.
3.
4.
Indicate reading 2D is allowed. Enabled symbologies are separated by a comma.
2D
Additional information includes: minimum length -> maximum length
1.
Scan Mode 2.
3.
**【Exit Setup】
"+" is followed by the additional feature of the symbology.
Minimum length -> maximum length
"No Check Digit" or "Check Digit"
"Fixed Length": i.e. discrete length, even number(s) between 2 and 64.
Manual Scan
Sense Scan
Continuous Scan
Description
38