Newland HR3250 Marlin User Manual page 158

【Enter Setup】
When scanning an EAN-13 barcode, send the leftmost character through the 3rd and the last 4th
character through the rightmost of the data:
1. Scan the Enter Setup barcode.
2. Scan the Enable Extraction barcode.
3. Scan the Program Extraction Option barcode.
4. Scan the numberic barcodes in the following table, the Save barcode and the Exit Setup barcode.
Digit 005
Meaning EAN-13 ID
Barcode Type Section
Note:
1. Up to 5 data extraction sections are allowed for one 1D extraction option.
2. Neither the start position nor end position can be greater than 127.
3. Data extraction sections can be overlapped. For instance, section 1: 1st character through the 5th (Left to
Right); section 2: 2rd character through the 4th (Left to Right).
Start position can be greater than end position. In the example above, data extraction section 2 is "001 004 001",
4.
that means the order of extraction is the last 4th, the last 3rd, the last 2nd and the rightmost.
5. To extract only one character, make start position equal to end position.
**【Exit Setup】
000 001
Start with
Left to Right
leftmost char
Data Extraction Section 1
003 001
End with
Right to Left
3rd char
Data Extraction Section 2
004 001
Start with last End with
4th char rightmost char
158