Newland HR3250 Marlin User Manual page 169

【Enter Setup】
E9 and F4 Example: Send all but the last characters, followed by 2 tabs
Send all characters except for the last 8 from the barcode above, followed by 2 tabs.
Command string: E908F40902
E9 is the "Send all but the last characters" command
08 is the number of characters at the end to ignore
F4 is the "Insert a character multiple times" command
09 is the hex value for a horizontal tab
02 is the number of time the tab character is sent
The data is output as: 1234567890AB<tab><tab>
B3 Insert symbology name
Insert the name of the barcode's symbology in the output message, without moving the cursor.
B4 Insert barcode length
Insert the barcode's length in the output message, without moving the cursor. The length is expressed as a numeric string
and does not include leading zeros.
169 **【Exit Setup】