Newland HR3250 Marlin User Manual page 168

【Enter Setup】
F3 Send all characters up to a particular character
Syntax=F3ssxx (ss: The particular character's hex value; xx: The insert character's hex value)
Include in the output message all characters from the input message, starting with the character at the current cursor
position and continuing to, but not including, the particular character "ss," followed by character "xx." The cursor is moved
forward to the "ss" character.
F3 Example: Send all characters up to a particular character
Using the barcode above, send all characters up to but not including "D," followed by a carriage return.
Command string: F3440D
F3 is the "Send all characters up to a particular character" command
44 is the hex value for a "D"
0D is the hex value for a CR
The data is output as: 1234567890ABC
<CR>
E9 Send all but the last characters
Syntax=E9nn (nn: The numeric value (00-99) for the number of characters that will not be sent at the end of the message)
Include in the output message all but the last "nn" characters, starting from the current cursor position. The cursor is moved
forward to one position past the last input message character included.
F4 Insert a character multiple times
Syntax=F4xxnn (xx: The insert character's hex value; nn: The numeric value (00-99) for the number of times it should be
sent)
Send "xx" character "nn" times in the output message, leaving the cursor in the current position.
**【Exit Setup】 168