i3 International Ax40W2 series User Manual page 8

3.3 Disassembling the Camera
Before you mount and adjust the camera,
follow these steps to disassemble the camera.
1. Using the hex key provided, loosen two
screws on the cover.
2. Remove the dome cover.
3.4 Attaching the Desiccant
1. Take the desiccant out of the package (#11 on Accessories list on page 5)
2. Peel the protective layer revealing the adhesive surface on the desiccant and
attach to the inside of the dome cover as shown in the diagram below.
Peel the
protective layer
on the desiccant
i3-TRNG-CAMS-Ax40W.indd
8
Attach
dessicant to
the inside
of the dome
cover
Rev. 141126