Note: Enabling Streams 2 and 3 may cause frames being dropped on
Stream 1.
Configure Stream 1 - Primary Streaming (Recorded Video):
•
Video Codec: Set the compression mode to H264 or MJPEG
•
Resolution: Set the resolution of the recorded video to one of the following:
»
D1 (720×480)
»
SVGA (800×600)
»
720P (1280×720)
•
Frame Rate: Set the frame rate for the recorded video to 1, 3, 7.5, 10, 15, or
30 fps
•
Bit Rate (for H264 codec): Set the video bit rate from 50-8000 kbit/s
•
H264 GOP (for H264 codec): Set the GOP rate from 1-60. The lower the
number, the lower the compression the larger the video size. The higher the
number, the higher the compression and the smaller the video size. GOP rate
determines the i-Frame frequency.
•
H264 Rate Control Mode (for H264 codec): VBR (Variable Bit Rate) or CBR
(Constant Bit Rate). See p. 21 for details.
•
Quality (for MJPEG codec only): HIGH, MID, LOW
Configure Stream 2 - Secondary Streaming:
•
Video Codec: Set the compression mode to H264 or MJPEG
•
Resolution: Set the resolution of the recorded video to one of the following:
»
"None" to disable Secondary Streaming
»
CIF (352 x 240)
»
VGA (640 x 480)
»
4CIF (704 x 480)
»
D1 (720×480)
»
SVGA (800×600)
»
720P (1280×720)
•
Frame Rate: Set the frame rate for the recorded video to 1, 3, 7.5, 15 or 30 fps
•
Bit Rate (for H264 codec): Set the video bit rate from 50-8000 kbit/s
•
H264 GOP (for H264 codec): Set the GOP rate from 1-60. (Same as Primary)
•
H264 Rate Control Mode (for H264 codec): VBR (Variable Bit Rate) or CBR
(Constant Bit Rate). See p. 21 for details.
•
Quality (for MJPEG codec only): HIGH, MID, LOW
Configure Stream 3 - Third Streaming (Live View):
i3-TRNG-CAMS-Ax40W.indd
23
Rev. 141126