i3 International Ax40W2 series User Manual page 7

Power Connectors
3.2
Connect the PoE or DC12V power connector.
PoE (IEEE 802.3af): Connect the RJ-45 connector to a PoE compatible network
device that supplied power through the Ethernet cable.
DC12V: Connect the DC12V power connector to a DC12V power.
WARNING! DO NOT connect both PoE and DC12V power connectors
at the same time. For DC power supply use, make sure the polarity is
correct to avoid malfunction and / or camera damage.
i3-TRNG-CAMS-Ax40W.indd
DC12V
7
POE/ETHERNET
Rev. 141126