i3 International Ax40W2 series User Manual page 29

Condition Settings for Sending E-mail by Motion:
•
Subject: Enter the email subject
•
Message: Enter the body of the email message
•
Attach Image: Set to ON to attach a snapshot to the motion-triggered email
Email Address List:
•
Configure up to three separate email reciepients. Set Enable and Motion
settings to ON and enter the email address for each of the reciepients in the
corresponding field.
FTP Server:
•
FTP Record Conditions: To enable, set to MOTION or SCHEDULED
•
FTP Server: Enter the FTP Server address
•
Login ID: Enter the FTP Server login
•
Password: Enter the FTP Server Password
•
FTP Port: Enter the FTP Port
Scheduled Recording Table:
•
Set the recording schedule type for each day of the week: OFF (to disable), ALL
DAY, SCHEDULE 1 or SCHEDULE 2. Schedules 1 and 2 are configured directly
below.
Scheduled Recording Settings:
•
Schedule 1 and Schedule 2: Set the Start Time and End Time for your custom
recording schedules.
•
Recording Cycle: Set the length of the video clip. Values range between 2
seconds and 120 seconds (2 minutes)
•
File Name: Set the default video file name
•
Server Path: Set the FTP Server path, where the video recordings will be
stored.
i3-TRNG-CAMS-Ax40W.indd
29
Rev. 141126