i3 International Ax40W2 series User Manual page 27

Auto Exposure: Select this option to correct the exposure automatically.
•
Exposure Mode: is set to AES
•
Slow Shutter: Set the shutter speed. Acceptable value range is from 1/30 to
1/3.75 sec. Select OFF to disable the feature.
•
Max Gain: Set the maximum gain value. The higher value will enhance the video
signal. Note that the noise will also be enhanced. Values range from 24 to 36.
Manual Exposure: Select this option to correct the exposure manually.
•
Shutter Speed: Set the shutter speed. Acceptable value range is from 1/8000 to
1/60 sec.
•
Manual Gain: Set the Manual Gain value. The values range from 0 to 36
Exposure Misc:
•
EV: Set exposure value between -2 and 2. Higher values produce brighter
images.
•
Day Night: Set the Day/Night setting to AUTO, COLOR or BW
•
Noise Reduction: Set the Noise Reduction value. The values range from 0 to
255.
•
BLC: When parts of the environment are poorly lit, BLC can be configured to
compensate for inadequate lighting conditions. To configure the individual areas
that will receive compensation, select one of the available options: UPPER 2
3rds, LOWER 2 3rds, CENTER 1 3rd, CENTER 1 6th, LEFT, RIGHT, or FULL.
Enabled areas will be shaded in the Preview screen.
•
WDR: Set the Wide Dynamic Range Level if desired. The WDR can be turned
OFF, or set to HIGH, MIDDLE or LOW.
•
Gamma Correction: Gamma Correction can be set to 0.45 or to 1.
•
Reset Exposure: Click this button to restore camera default exposure values.
After making any setting adjustments, remember to click the Save button
to save any changes made.
i3-TRNG-CAMS-Ax40W.indd
27
Rev. 141126