i3 International Ax40W2 series User Manual page 24

•
Video Codec: Set the compression mode to H264 or MJPEG
•
Resolution: Set the resolution of the recorded video to one of the following:
»
"None" to disable Third Streaming
»
CIF (352 x 240)
»
VGA (640 x 480)
»
4CIF (704 x 480)
»
D1 (720×480)
»
SVGA (800×600)
•
Frame Rate: Set the frame rate for the recorded video to 1, 3, 7.5, 15 or 30 fps
•
Bit Rate (for H264 codec): Set the video bit rate from 50-8000 kbit/s
•
H264 GOP (for H264 codec): Set the GOP rate from 1-60. (Same as Primary)
•
H264 Rate Control Mode (for H264 codec): VBR (Variable Bit Rate) or CBR
(Constant Bit Rate). See p. 21 for details.
•
Quality (for MJPEG codec only): HIGH, MID, LOW
Advance Settings:
•
White Balance: Set White Balance mode to Auto or Manual according to the
image's lighting conditions for the best color temperature.
•
R Gain, G Gain, B Gain (Use when White Balance is set to Manual):
Adjust levels of red, green and blue in the image.
Values can be set from 0-255
•
Brightness: adjust the image brightness level, Values range from 0% to 100%.
•
Contrast: adjust the image contrast level. Values range from 0% to 100%.
•
Saturation: adjust the image saturation level. Values range from 0% to 100%.
•
Sharpness: adjust the image sharpness level. Values range from 0 to 15.
•
Hue: adjust the image hue. Values range from 0 to 15.
After making any setting adjustments, remember to click the Save button to save
any changes made.
i3-TRNG-CAMS-Ax40W.indd
24
Rev. 141126