i3 International Ax40W2 series User Manual page 30

Motion Recording Settings:
•
Motion Recording Cycle: Set the video recording length (in sec) preceeding the
triggered motion. Values range between 1 and 30 seconds.
•
Pre Recording Frame: Set the video frame rate for the video preceeding the
triggered motion. Values range between 1 and 10 frames per second.
•
Recording Cycle: Set the video recording length (in sec) that immediately
follows the triggered motion. Values range between 2 seconds and 120 seconds
(2 minutes)
•
Recording Frame: Set the video frame rate for the video that immediately
follows the triggered motion. Values range between 1 and 60 frames per
second.
•
File Name: Set the default video file name
•
Server Path: Set the FTP Server path, where the video recordings will be
stored.
After making any setting adjustments, remember to click the Save button
to save any changes made.
5.7 Communication Setup
The Communication tab is used to configure network and communication settings on
the camera.
i3-TRNG-CAMS-Ax40W.indd
30
Rev. 141126