i3 International Ax40W2 series User Manual page 20

Next, click the Setup button to access Annexxus camera Setup features.
5.1 Basic Setup
You may switch to the advanced setup at any time by clicking the button in the
bottom left-hand corner. To switch back to the Basic Setup, click the same button
again.
Basic Setup is divided into Camera and Network settings.
After making any setting adjustments, remember to click the Save button
i3-TRNG-CAMS-Ax40W.indd
In the main interface, you may adjust your camera's
Brightness, Contrast, Saturation and Sharpness levels.
Click Save to save adjusted settings or
Default to set all settings back to 50%.
Note: This panel is enabled in the Live View mode only
and is disabled when in the Setup mode.
20
Rev. 141126