i3 International Ax40W2 series User Manual page 26

To draw the privacy zone, follow these instructions:
1. Set the Privacy Zone Enable to ON to activate a privacy zone.
2. Position your mouse cursor over the Preview window, press and hold the left
mouse button.
3. While holding down the left mouse button, drag the cursor to draw a
rectangular area over the zone that needs to be concealed.
4. Release the mouse button. The privacy area rectangle will be shaded blue in the
Preview window.
5. If you are not satisfied with the size or positioning of the privacy zone, repeat
steps 2-4 to re-draw it.
6. Click the Apply button
7. Repeat Steps 1-6 for additional Privacy Zones, if using.
After making any setting adjustments, remember to click the Save button
to save any changes made.
5.5 Exposure
Set the exposure level for your camera. Exposure time determines how much light
passes through the camera aperture to the focus.
i3-TRNG-CAMS-Ax40W.indd
26
Rev. 141126