Notes And Restrictions; Notes And Restrictions On The Use Of The Machine - Fuji Xerox DocuCentre SC2020 User Manual

Notes and Restrictions

This section describes the notes and restrictions to observe when using the machine.

Notes and Restrictions on the Use of the Machine

Notes on Switching Off the Power
After the power is switched off, the machine performs internal power off processes for a
while. After turning the power off, turning it on again before the screen display has
disappeared will not start the machine right away. Before turning the power on, check that
the operation screen display has disappeared.
Installing and Moving the Machine
Contact our Customer Support Center or a Customer Engineer before moving the
machine.
Do not subject the machine to shocks while it is in operation.
Take care not to get fingers caught when closing the document cover.
Do not place any objects near the ventilation openings of the machine's exhaust fan.
Character Codes
In data transmission from a computer, if characters that the machine does not support are
included in the file names, these characters may not be displayed correctly. Only ASCII
characters can be used.
Hard Disk
You cannot install a hard disk into this product.
Job History Report
If the output file name includes characters other than alphanumeric, it is not displayed
correctly on the Job History Report.
Document Feeder
The machine does not detect a document placed in the document feeder during Sleep
mode.
Paper Setting
When paper jam occurs at a tray, reduce the sheets of paper in the tray.
Management
Auditron is effective only for copy and print jobs. It does not control scan or fax jobs.
<Data> LED
When the machine has entered the Power Saver mode, the <Data> LED is extinguished even
when a received or pending fax job remains in the machine. The <Data> LED does not light
up in the Power Saver mode even when the machine receives a print job.
Image Quality
When the default for [Output Color] is set to [Black & White], the color density of the first
color output image after the machine is turned on may be slightly deteriorated. Use the
automatic calibration function.

Notes and Restrictions

14
293