Fuji Xerox DocuCentre SC2020 User Manual page 249

Symptom Possible Cause
Paper is often Is paper loaded correctly in
jammed or the tray?
wrinkled.
Is the tray inserted correctly?
Is the paper damp?
Is the paper curled?
Are the paper and tray
settings correct?
Are any torn pieces of paper
remaining or is there a
foreign object in the
machine?
Is non-standard paper loaded
in the tray?
Is paper exceeding the
maximum fill line in the tray?
Are the paper guides set
correctly?
Is the paper finely cut out?
A document is not Is the document small?
fed onto
document feeder.
An error code Check the positions of the
paper guides of Tray 5
appears when
paper is loaded in (bypass).
Tray 5 (bypass)
and the <Start>
button is pressed.
Machine Problems
Remedy
Load paper correctly.
Refer to "Loading Paper in Trays 1 and 2" (P.65).
Correctly insert the tray by firmly pushing it
until it stops.
Refer to "Loading Paper in Trays 1 and 2" (P.65).
Replace the paper with a new one.
Turn over the paper in the tray, or replace the
paper with a new one.
Correctly set the paper settings to
correspond to the paper loaded.
Refer to "Changing the Paper Size for Trays 1 and 2"
(P.68).
Open the cover of the machine or pull out the
tray to remove any torn pieces or foreign
objects.
Refer to "Paper Jams" (P.274).
Replace with paper that meets machine
specifications.
Refer to "Paper Types" (P.60).
Load paper in the tray so that it does not
exceed the maximum fill line.
Refer to "Loading Paper in Trays 1 and 2" (P.65).
Load paper correctly, and align the paper
guides to the paper.
Refer to "Loading Paper in Trays 1 and 2" (P.65).
Refer to "Loading Paper in Tray 5 (bypass)" (P.66).
Some paper types may not be cut out finely.
Load the paper after fanning it well.
The minimum size of document that can be
loaded into the document feeder is A5
Adjust the paper guides to the correct
positions.
Refer to "Error Code" (P.267).
Refer to "Loading Paper in Tray 5 (bypass)" (P.66).
.
13
249