Sided Copying; Lighten / Darken - Fuji Xerox DocuCentre SC2020 User Manual

5 Copy

2 Sided Copying

To make duplex copies with the specified binding position.
1
Select [2 Sided Copying] on the [Copy] tab.
2
Select the desired setting, and then select [OK].
Note
1
5
1
2
2
When you are using the document glass and it is set to [1
display prompts you for another page after pressing the <Start> button.
1) If you want to place a new document, replace the document with a new document, and
then select [Continue] or press the <Start> button.
2) If you finish copying, select [Print Now].
Note

Lighten / Darken

To adjust the contrast to make the copy lighter or darker than the original.
1
Select the [Quality] tab, and then select [Lighten
/ Darken].
86
• Bold values are the factory default menu
settings.
1 Sided
2 Sided Binding of Output
1 Sided Binding of Original
2 Sided
• When you use the document feeder to copy both sides of a document, the printed position of the
front and back of the document may differ if the size in the document size setting and the size of
the document do not match. In this case, set [Original Size] to the same size as the document.
Select 1-sided or 2-sided and
specify binding position for the 2-
Long Edge Binding
sided copy.
Short Edge Binding
Long Edge Binding
Short Edge Binding
2 Sided] or [2 2 Sided], the