Using A Scanner On The Network; Overview - Fuji Xerox DocuCentre SC2020 User Manual

Using a Scanner on the Network

This section describes how to use a scanner on the network.
Note • This feature does not require a network scan driver.

Overview

The Scan to Server/Computer feature allows you to scan documents and send the scanned
document to a network computer via the FTP or SMB protocol.
Scan
You can select the kind of server and specify a destination to store the scanned document
with the CentreWare Internet Services or Address Book Editor.
The following items are required to use the Scan to Server/Computer feature.
Using SMB
To transfer data via SMB, your computer must run on one of the following operating
systems that includes folder sharing.
Note • Windows Server 2003, Windows XP, Mac OS X 10.5 support IPv4 only.
• For Mac OS X, a shared user account is required.
• Mac OS X 10.5/10.6/10.7/10.8/10.9
• Windows Server 2003
• Windows Server 2008
• Windows Server 2008 R2
• Windows Server 2012
• Windows Server 2012 R2
• Windows XP
• Windows Vista
• Windows 7
• Windows 8
• Windows 8.1
Using FTP
To transfer data via FTP, one of the following FTP servers and an account to the FTP server
(login name and password) are required.
Note • Windows Server 2003, Windows XP, Windows Vista, Mac OS X 10.5 support IPv4 only.
• Windows XP
FTP Server
Using FTP
Using SMB
Computer
FTP service of Microsoft Internet Information Services 5.1

Using a Scanner on the Network

Computer
7
131