Fuji Xerox DocuCentre SC2020 User Manual page 177

To specify the position of banner sheet, and also specify the tray in which the banner
sheet is loaded.
Values:
Insert Position Off
Front
Back
Front & Back
Specify Tray Tray5 (Bypass)
Tray1
Tray2
Substitute Tray
Purpose:
Specifies whether to use paper of a different size when the paper that is loaded in the
specified tray does not match the paper size settings for the current job.
Values:
Off
Larger Size
Nearest Size
Use Tray5 (Bypass)
Letterhead 2 Sided
Purpose:
To specify whether to print on both sides when using letterhead.
Values:
Disable
Enable
Report 2 Sided Print
Purpose:
To specify whether to print reports on both sides of a sheet of paper.
Values:
1 Sided
2 Sided
Copy Auditron
Purpose:
To specify whether to limit the copy functions that can be used per user by Auditron
authentication.
Does not print the banner sheet.
Inserted before the first page of every copy.
Inserted after the last page of every copy.
Inserted before the first page of every copy
and after the last page of every copy.
The banner sheet is loaded in the Tray 5
(bypass).
The banner sheet is loaded in Tray 1.
The banner sheet is loaded in Tray 2.
No tray size substitute accepted.
Substitutes paper of next largest size. When there is no larger
paper size, the machine substitutes paper of nearest size.
Substitutes paper of nearest size.
Substitutes paper from Tray5 (Bypass).
Does not print on both sides of letterhead.
Prints on both sides of letterhead.
Prints reports on one side of a sheet of paper.
Prints reports on both side of a sheet of paper.
Understanding the Machine Menus
9
177