Setting Date & Time - HIKVISION DS-7600NI-SE/P Series User Manual

DS-7600 Series NVR User's Manual
Setting Date & Time
It is extremely important to setup the system date and time to accurately timestamp recordings and events.
Steps:
1. Enter the System Configuration menu by going to Menu > System Configuration > General.
2. Select the Time/Date tab, as shown in Figure 8.
3. The current system time and date as well as the time zone will be displayed. Using the directional
buttons on the remote or the mouse, selects the correct date, time and time zone.
4. To enable Daylight Savings Time:
1) Select a time zone that supports DST.
2) Check the Enable DST checkbox and click Customize button to pop up the DST Setting
menu, as shown in Figure 9.
3) You can check the Auto DST Adjusting checkbox or manually check the date of the DST
period.
4) Click the Apply button to confirm the settings. Click OK to return to the upper level menu.
Figure 8 System Configuration Menu
Figure 9 DST Settings Menu
21