Sam4s ER-380 Operation And Program Manual page 13

4. Put the leading edge of the paper over the printer
5. Close the paper cover slowly until it locks firmly
6. Passing the leading edge of the paper through the cutter slot. Tear off the excess paper.
Replace the printer cover.
※ If you wish to use the printer to print a sales journal or electronic journal, insert the paper
into the paper take-up spool. Wind the paper two or three turns around the spool shaft and
install the spool in the mount.
Sam4S 3xx, 4xx, 52xx Electronic Cash Register AU
Getting Started • 5