Kbd Shift (Er-420M Only) - Sam4s ER-380 Operation And Program Manual

KBD SHIFT ( ER-420M only )
Options - Program 70
7
Address
N1
Descriptor - Program 80
HALO - Program 90
9
This will enable the shift to move the PLU on the NLU by this number. I.e. If NLU has PLU#1 and
you program X = 12 above, the KBD Shift will put PLU #13 on keyboard level 2, and PLU #25 on
Shift 3. The maximum number for X is 18.
170 • Program Mode Programming
Repeat for another
function key
0 SBTL N1
OPTION
KBD Shift is:
Key is active in X control lock position only?
- Refer to "Program 80 - Function Key Descriptor"
0 SBTL X
KBD SHIFT CASH
Pop up
Stay down
Default values have been highlighted in bold print
KBD SHIFT CASH
Sam4S 3xx, 4xx, 52xx Electronic Cash Register AU
VALUE = SUM
0
1
Yes = 2
No = 0