Table of Contents
Advertisement
The blade server can have features that are not described in the documentation
that comes with the server. Additionally, the documentation might be updated
occasionally to include information about those features, or technical updates might
be available to provide additional information that is not included in the blade server
documentation on the CD.
You can check for the most recent versions of all BladeCenter documentation
http://www.ibm.com/support/us/en/ or at the BladeCenter information center. The
BladeCenter information center is available in the IBM Systems information center
at http://publib.boulder.ibm.com/infocenter/systems/.
In addition to the documentation in this library, be sure to review the planning and
installation documents for your BladeCenter hardware available at
http://www.ibm.com/support/us/en/.
The Documentation CD
The Documentation CD contains documentation for the blade server in PDF and
includes the IBM Documentation Browser to help you find information quickly.
Hardware and software requirements
The Documentation CD requires the following minimum hardware and software:
v Microsoft
v 100 MHz microprocessor
v 32 MB of RAM
v Adobe
Using the Documentation Browser
Use the Documentation Browser to browse the contents of the CD, read brief
descriptions of the books, and view books using Adobe Acrobat Reader or xpdf.
The Documentation Browser automatically detects the regional settings in use in
your system and displays the books in the language for that region (if available). If
a book is not available in the language for that region, the English version is
displayed.
Use one of the following procedures to start the Documentation Browser:
v If Autostart is enabled, insert the CD into your CD or DVD drive. The
v If Autostart is disabled or is not enabled for all users:
®
®
Windows
XP, Windows 2000, or Red Hat Linux
®
Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating
systems
Note: Acrobat Reader software is included on the CD, and you can install it
when you run the Documentation Browser.
Documentation Browser starts automatically.
– If you are using a Windows operating system, insert the CD into your CD or
DVD drive and click Start
x:\win32.bat
where x is the drive letter of your CD drive, then click OK.
– If you are using a Linux operating system, insert the CD into your CD drive
and run the following command from the /mnt/cdrom directory:
sh runlinux.sh
Run. In the Open field, type:
7
Chapter 1. Introduction
Advertisement
Table of Contents
