Dell 2130cn User Manual page 190

For Windows Vista:
a. Open Control Panel.
b. Select Network and Internet.
c. Select Network and Sharing Center.
d. Select Connect to a network.
e. Select the original setting from the network items listed in Connect to a network, and then click Connect.
For Windows Server 2008:
a. Open Control Panel.
b. Select Network and Sharing Center.
c. Select Connect to a network.
d. Select the original setting from the network items listed in Connect to a network, and then click Connect.
Scene 2. Construct new wireless network environment for both computer and printer (When wireless setting
needs to be set to your computer)
For DHCP network:
1. Create wireless setting of your computer following the steps below.
NOTE: If your computer provides a wireless printer adapter tool, change the wireless settings using this tool. Or you can change the wireless settings
using the tool provided by the operating system. See the instructions below.
For Windows XP and Windows Server 2003:
a. Select Network Connections from Control Panel.
b. Right-click Wireless Network Connection and select Properties.
c. Select the Wireless Networks tab.
d. Ensure the check box for Use Windows to configure my wireless network settings is checked.
NOTE: Be sure to write down the current wireless computer settings in steps e and g so that you can restore them later.
e. Click the Advanced button.
f. Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box.
g. Click the Add button to display Wireless network properties.
h. Under the Association tab, enter the following information and click OK.
Network name (SSID): dell_device
Network Authentication: Open
Data encryption: Disabled
Ad hoc network: checked
Downloaded from ManualsPrinter.com Manuals