Dell 2130cn User Manual page 159

Print Server Settings
The Print Server Settings tab includes Basic Information, Port Settings, Wireless LAN, TCP/IP, NetWare, E-Mail Alert, and SNMP pages.
Basic Information
Purpose:
To configure the printer's basic information.
Values:
Printer Name
Location
System Contact Person
Settings
Administrator E-Mail
Address
Asset Tag Number
Auto Refresh
EWS Settings
Auto Refresh Interval
NOTE: The Auto Refresh feature is effective for the contents of the Top Frame, Printer Status page, Job List page, and Completed Jobs page.
Port Settings
Purpose:
To specify whether to enable or disable printing ports and management protocol features.
Values:
Ethernet
Settings
1
Ethernet*
Current Ethernet Settings
MAC Address
LPD
Port9100
2
WSD*
Port
Status
NetWare*
E-Mail Alert
SNMP
1
* The Ethernet settings are not displayed when the optional wireless printer adapter is installed.
2
* An optional network protocol adapter is required to display the item.
NOTE: The settings in the Port Settings page will be valid only when the printer is rebooted. When you change or configure the settings, click the Apply
new settings button to apply new settings.
Wireless LAN
Purpose:
To configure the detailed setting for the wireless network.
Values:
SSID
Network Type
Downloaded from ManualsPrinter.com Manuals
Specifies the name of the printer using up to 31 alphanumeric characters.
Specifies the location of the printer using up to 63 alphanumeric characters.
Specifies the contact name, number, and other information of the printer's administrator and service center using
up to 63 alphanumeric characters.
Specifies the contact address of the printer's administrator and service center using up to 63 alphanumeric
characters.
Enter the asset tag number for the printer.
Sets whether or not to automatically refresh the contents of the status display pages.
Sets the time interval for refreshing the contents of the status display pages automatically from 15 to 600
seconds.
Auto
10BASE-T
Half-Duplex
10BASE-T
Full-Duplex
100BASE-TX Half-Duplex
100BASE-TX Full-Duplex
Displays the printer's MAC address.
Select the check box to enable LPD.
Select the check box to enable Port9100.
Select the check box to enable the WSD port.
Select the check box to enable the NetWare port. You can also configure the transport protocol to be used. TCP/IP can be
2
selected as the transport protocol.
Select the check box to enable the E-Mail Alert feature.
Select the check box to enable the SNMP (Simple Network Management Protocol).
You can also configure the transport protocol to be used. UDP can be selected as the transport protocol.
Specifies the name that identifies the wireless network. Up to 32 alphanumeric characters.
Specifies the network type from either Ad-Hoc or Infrastructure.
Detects Ethernet transmission rate and the duplex settings automatically.
Selects 10Base-T Half-Duplex as the default value.
Selects 10Base-T Full-Duplex as the default value.
Selects 100Base-T Half-Duplex as the default value.
Selects 100Base-T Full-Duplex as the default value.
Displays the current settings of Ethernet.