Dell 2130cn User Manual page 41

1
60*
Specify the value in increments of 1.
5-128
1
* Denotes country-specific factory default values.
The printer sets the amount of space between each line (vertical line spacing) based on the Form Line and Orientation menu items. Select the correct Form
Line and Orientation before changing Form Line.
See also:
"Orientation"
Quantity
Purpose:
To set the default print quantity. (Set the number of copies required for a specific job from the printer driver. Values selected from the printer driver always
override values selected from the operator panel.)
Values:
1*
Specify the value in increments of 1.
1-999
Image Enhance
Purpose:
To specify whether to perform the image enhancement feature. Image enhancement is a feature that makes the boundary line between black and white
smoother to decrease jagged edges and enhance the visual appearance.
Values:
On* Enables the Image Enhancement feature.
Off Disables the Image Enhancement feature.
Hex Dump
Purpose:
To help isolate the source of a print job problem. With Hex Dump selected, all data sent to the printer is printed in hexadecimal and character representation.
Control codes are not executed.
Values:
Disable* Disables the Hex Dump feature.
Enable Enables the Hex Dump feature.
Draft Mode
Purpose:
To save toner by printing in the draft mode. The print quality is reduced when printing in the draft mode.
Values:
Disable* Does not print in the draft mode.
Enable Prints in the draft mode.
LineTermination
Purpose:
To add the line termination commands.
Values:
The line termination command is not added.
Off*
CR=CR, LF=LF, FF=FF
Downloaded from ManualsPrinter.com Manuals