Download  Print this page

Advertisement

Table of Contents
Power Saver Timer
Mode 2
Control Panel Tone
Invalid Key Tone
Machine Ready Tone
Job Completed Tone
Fault Tone
Alert Tone
Out of Paper Alert Tone
Low Toner Alert Tone
Base Tone
Fault Time-Out
Time-Out
Panel Language
Auto Log Print
Print ID
Print Text
Banner Sheet Insert
Position
Banner Sheet Specify
1
Tray*
RAM Disk
2
Odd Page 2 Sided*
Substitute Tray
mm / inch
1
*
This item is only available when the optional 250-sheet feeder is installed.
2
*
This item is only available when the optional duplexer is installed.
 
USB Settings
Purpose:
To change printer settings affecting a USB port.
Values:
Port Status Specifies whether to enable the USB interface.
 
PCL Settings
Purpose:
To change the printer settings that only affect jobs using the PCL emulation printer language.
Values:
Paper Tray
Specifies the input tray.
Paper Size
Specifies the paper size.
Custom Size - Y
Specifies the length of custom size paper.
Custom Size - X
Specifies the width of custom size paper.
Orientation
Specifies how text and graphics are oriented on the page.
2 Sided
Sets duplexing as the default for all print jobs. This item is only available when the optional duplexer is installed.
Font
Specifies the font from the list of registered fonts.
Symbol Set
Specifies a symbol set for the specified font.
Font Size
Specifies the font size for scalable typographic fonts.
Font Pitch
Specifies the font pitch for scalable monospaced fonts.
Form Line
Specifies the number of characters in a line.
Quantity
Sets the number of copies to print.
Downloaded from ManualsPrinter.com Manuals
Sets the time for transition to Power Saver Mode 2.
Specifies whether to enable the tone that is emitted when the operator panel input is correct.
Specifies whether to enable the tone that is emitted when the operator panel input is incorrect.
Specifies whether to enable the tone that is emitted when the printer becomes ready.
Specifies whether to enable the tone that is emitted when a print job is complete.
Specifies whether to enable the tone that is emitted when a job ends abnormally.
Specifies whether to enable the tone that is emitted when a problem occurs.
Specifies whether to enable the tone that is emitted when the printer runs out of paper.
Specifies whether to enable the tone that is emitted when toner or some other consumable is low.
Specifies whether to enable the tone that is emitted when the operator panel screen returns to the default by scrolling the loop
menu.
Specifies in seconds the amount of time the printer should cancel for a job stops abnormally. The print job is cancelled if the time-
out time is exceeded.
Specifies in seconds the amount of time the printer should wait for data to arrive from the computer. The print job is cancelled if
the time-out time is exceeded.
Sets the language to be used on the operator panel.
Specifies whether to automatically print a log of completed jobs after every 20 jobs.
Specifies where to print the user ID on the output paper.
Specifies whether the printer outputs PDL data, which is not supported by the printer, as text when the printer receives it.
Specifies where to insert a banner sheet.
Specifies which input tray to use to insert a banner sheet.
Specifies whether to allocate RAM for the file system for the Secure Print and Proof Print features.
This item is only available when the 512 MB, or higher, optional memory is installed.
Specifies how the odd last page is printed when using duplex printing.
Specifies whether or not to use another size paper when the paper that is loaded in the specified tray does not match the paper
size settings for the current job.
Specifies the measurement unit to be used on the operator panel screen as either mm or inches.

Advertisement

Table of Contents

   Related Manuals for Dell 2130cn

Comments to this Manuals

Symbols: 0
Latest comments: