POWR
Installing the camshaft
1. Install the new oil seal 1.
Bearing outer race attachment:
90890-06626
2. Install the camshaft 2 in the direction
shown, then the retaining bolt 3.
Installing the rocker arm assembly
1. Check that the camshaft dowel pin hole
a is in the position shown in the illustra-
tion. Adjust if necessary.
5-33
Power unit
1
S62Y5630J
2. Assembly the rocker arm 1 and rocker
arm shaft 2, and the tensioner 3, rocker
arm retainer 4 by installing the bolts.
NOTE:
Make sure that the arrow marks b on the two
tensioners are facing up.
S62Y5650
62Y5A11