BRKT
Installing the upper case
1. Install the upper mount 1 and bolts 2
into the upper case, and then tighten the
bolts 3.
2. Set the lower mounts 4 and bolts to the
upper case.
3. Install the end of the spring 5 into the
groove of the mount housing 6, and
then tighten the bolts 7.
7-17
Bracket unit
NOTE:
Be sure to install the ground lead 8 into the
mount housing 6.
4. Install the upper and lower mounting
bolts into the swivel bracket 9 simulta-
neously.
5. Install the upper mounting nut 0 and
lower mounting nut A, and then tighten
them to the specified torques.
6. Install the cover B by installing the
screw.
Upper mounting nut 0:
24 N·m (2.4 kgf·m, 17 ft·lb)
Lower mounting nut A:
42 N·m (4.2 kgf·m, 30 ft·lb)
62Y5A11