BRKT
Disassembling the oil pan
1. Remove the muffler 1 from the oil pan
2.
2. Remove the exhaust manifold 3 from
the oil pan 2.
3. Remove the oil pan 2 from the exhaust
guide 4.
4. Remove the oil strainer 5 and the relief
valve housing 6.
CAUTION:
Do not reuse the gaskets, always replace
them with a new one.
Checking the oil strainer and the
relief valve
7-15
Bracket unit
1. Check the oil strainer and relief valve for
dirt and residue. Clean if necessary.
Assembling the oil pan
1. Install the gaskets onto the exhaust
guide 1.
2. Install the relief valve assembly 2 by
installing the bolts, then tightening them
finger tight.
3. Install the oil strainer 3 by installing the
bolts.
4. Install the water pipe 4.
5. Install the oil pan 5 and bolts, and then
tighten the bolts finger tight.
6. Install the exhaust manifold 6 and bolts,
and then tighten the bolts finger tight.
62Y5A11