Yamaha FT50C Service Manual page 107

CAUTION:
Do not turn the sprockets counterclock-
wise, otherwise the valve system may be
damaged.
9. Tighten the driven sprocket bolt 2 to the
specified torque.
Flywheel holder: 90890-06522
Driven sprocket bolt 2:
38 N·m (3.8 kgf·m, 27 ft·lb)
10. Tighten the drive sprocket nut 6 to the
specified torque, and then install the
breather hose.
NOTE:
Use a deep socket A (M42) for this proce-
dure.
62Y5A11
Timing belt and sprockets
Crankshaft holder 18 B:
90890-06562
Drive sprocket nut 6:
140 N·m (14 kgf·m, 100 ft·lb)
1
2
3
4
5
6
7
8
9
5-20