Konica Minolta pagepro 5650EN Service Manual page 95

6. Other
[1]
[1]
9. Re-mount the DIMM from the old print control board.
10. Re-mount the backup battery from the old print control board.
NOTE
• When the print control board is replaced, upgrade the firmware to the latest ver-
sion.
See P.23
60
[1]
A0DXF2C046DA
[2]
[3]
A0DXF2C047DA
[2]
A0DXF2C048DA
Field Service Ver. 1.0 Nov. 2007
5. Disconnect all connectors and flat
cables from the print control board
[1].
6. Remove three screws [1].
7. Remove the harness from the wire
saddle [2], and remove the metal
plate [3].
8. Remove four screws [1], and remove
the print control board [2].