Replacing The Tray 1 Feed Roller Assy - Konica Minolta pagepro 5650EN Service Manual

3. Periodical check
5. Close the top cover securely.
NOTE
• When removing or reinstalling the toner cartridge while it is being used or after it
has been used up, do not hold, stand or store cartridge on their ends or turn them
upside down; the toner inside the cartridge may become caked or unequally dis-
tributed.
3.4.2

Replacing the tray 1 feed roller assy

A. Periodically replaced parts/cycle
• Tray 1 feed roller
assy
B. Removal procedure
1. Remove the toner cartridge.
See P.22
10
[1]
A0DXF2C504DA
: Every 200,000 prints
[1]
[2]
A0DXF2C505DA
Field Service Ver. 1.0 Nov. 2007
4. Hold the toner cartridge [1] by the
grip, and then insert it into the slot
inside the printer.
2. While pushing down the shaft of the
feed roller assy, widen the tab [1] of
the feed roller assy to loosen it and
then slowly remove the feed roller
assy [2] from the shaft on the tray.