Konica Minolta pagepro 5650EN Service Manual page 144

Field Service Ver. 1.0 Nov. 2007
(3) SUBNET MASK
Function • Sets the subnet mask of the printer used in the network.
Use • To set the printer's subnet mask.
Setting 1. Select [SUBNET MASK] and press the Menu/Select key.
/procedure 2. Set desired subnet mask (first bite) with the up key /down key
key
3. Repeat the above procedures and set the subnet mask up to fourth bite.
4. Press the Menu/Select key.
• The default setting is "000.000.000.000."
(4) DEFAULT GATEWAY
Function • Sets the gateway address of the printer used in the network.
Use • To set the printer's gateway address.
Setting 1. Select [DEFAULT GATEWAY] and press the Menu/Select key.
/procedure 2. Set desired default gateway address (first bite) with the up key /down key
press the right key .
3. Repeat the above procedures and set the default gateway address up to fourth bite.
4. Press the Menu/Select key.
• The default setting is "000.000.000.000."
(5) DHCP
Function • Automatically acquires an IP address from the DHCP server, if there is one in the
network, and specifies whether to load other network information.
• To automatically acquire an IP address and load other network information.
Use ON : Enable IP auto acquisition setting.
OFF : Disable IP auto acquisition setting.
Setting • The default setting is ON.
/procedure
NOTE
• When setting the IP address manually, the [DHCP] setting is changed to [OFF].
(6) BOOTP
Function • Automatically acquires an IP address from BOOTP and specifies whether to load
other network information.
• To automatically acquire an IP address and load other network information.
Use ON : Enable IP auto acquisition setting.
OFF : Disable IP auto acquisition setting.
Setting • The default setting is OFF.
/procedure
NOTE
• When setting the IP address manually, the [BOOTP] setting is changed to
[OFF].
.
000.000.000.000 to 255.255.255.255
000.000.000.000 to 255.255.255.255
"ON"
ON
9. Menu
and press the right
and
OFF
"OFF"
109