Field Service Ver. 1.0 Nov. 2007
3.3.6
Transport motor (M1)
1. Remove the duplex unit.
See P.6
2. Remove the AD control board.
See P.8
[2]
[3]
[1]
[3]
[4]
[1]
[5]
A0FHF2C507DA
[2]
A0FHF2C508DA
3. Remove the screw [1], and remove
the ground wire [2].
4. Remove three screws [3] and the
spring [4], and remove the transport
motor assy [5].
5. Remove two screws [1], and remove
the transport motor [2].
3. Other
9