Konica Minolta pagepro 5650EN Service Manual page 153

9. Menu
(2) CUSTOM SIZE
Function • Sets the custom media width and length.
Use • To set the width and length of the custom media size.
Setting 1. Select [CUSTOM SIZE] and press the Menu/Select key.
/procedure 2. Select [WIDTH] or [LENGTH] and press Menu/Select key.
3. Set desired number with the up key /down key
<For North America>
• The default setting of WIDTH is 8.50 inches.
WIDTH: 3.00 inches to 8.50 inches.
• The default setting of LENGTH is 11.00 inches.
LENGTH: 5.00 inches to 14.00 inches.
<For other destinations>
• The default setting of WIDTH is 210 mm.
WIDTH: 76 mm to 216 mm.
• The default setting of LENGTH is 297 mm.
LENGTH: 127 mm to 356 mm.
NOTE
• By changing the [UNIT OF MEASURE] setting (INCHES/MILLIMETERS), the
custom size units are changed.
(3) PAPER TYPE
Function • Sets the default media type.
Use • To set the default media type.
Setting • The default setting is PLAIN PAPER.
/procedure
"PLAIN PAPER"/RECYCLED/THICK 1/THICK 2/THICK 3/LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/THIN PAPER
NOTE
• THICK 3 and THIN PAPER are selectable only on the pagepro 5650EN.
B. PAPER SIZE ERROR
Function • To select whether to detect a paper size error or not.
ENABLE : Paper size error is detected.
Use
DISABLE : No paper size error is detected.
Setting • The default setting is ENABLE.
/procedure
118
"ENABLE"
Field Service Ver. 1.0 Nov. 2007
and press the Menu/Select key.
DISABLE