3. Periodical check
[2]
3. Load the media face up in the tray 1.
4. Reattach the lid of the tray 1.
5. Push the tray 1 completely into the printer.
3.4.5
Replacing the tray 2 feed roller assy
A. Periodically replaced parts/cycle
• Tray 2 feed roller assy: Every 200,000 prints
B. Removal procedure
1. Remove the toner cartridge.
See P.22
[1]
[1]
14
[1]
A0DXF2C514DA
[2]
A0DXF2C002DA
A0DXF2C003DA
Field Service Ver. 1.0 Nov. 2007
2. Aligning the small tabs [1] on the
separation roller assy with the slots
of the shaft, push the separation
roller assy [2] completely in so that
the tab fits into the slot.
2. Pull the tray 1 [1] and tray 2 [2] out of
the printer.
3. Raise the tray 1 feed unit [1] upward.