Konica Minolta pagepro 5650EN Service Manual page 120

Field Service Ver. 1.0 Nov. 2007
Message
Priority
LCD1
PAPER ERROR
13
TRAYX PAPER
ERR
14 OUTPUT FULL
15 CHECK LEVER
16 MEMORY FULL
17
HOLD JOB
ERROR
Low 18
*1: Only when the optional duplex is mounted.
*2: Only when the optional offset tray is mounted.
*3: SSSS represents the media size while TTTT shows the media type.
LCD2/LCD3
• The size and type of media specified in the driver is
not loaded in any tray.
SSSS *3
• A different size of media from the one specified in the
TTTT *3
driver is loaded in the tray at media feeding.
• Displays when [TRAY CHAINING] is set to [ON].
• The size and type of media specified in the driver is
not loaded in the specified tray.
SSSS *3
• A different size of media from the one specified in the
TTTT *3
driver is loaded in the specified tray at media feeding.
• Displays when [TRAY CHAINING] is set to [OFF].
REMOVE
The printed media volume has reached maximum
PAPER
capacity in the exit tray of the main body.
(MAIN TRAY)
REMOVE
The printed media volume has reached maximum
PAPER
capacity in the sub tray of the offset tray.
(SUB TRAY) *2
FACE UP TRAY The face up lever is raised when duplex printing or sub
IS SELECTED tray output is specified.
The volume of data to be printed exceeds the permissi-
PRESS
ble amount of data to be processed by the machine's
CANCEL
memory.
UNABLE TO The specified data of the held job is being received, but
STORE JOB an optional HDD is not installed.
XXXX When printing a stored job, the printer configuration was
PRESS CANCEL changed since the job was stored.
8. Description of the control panel
Description
85