Toner Low; For Help - Konica Minolta pagepro 5650EN Service Manual

8. Description of the control panel
C. Firmware update
• The control panel displays the following description at firmware update.
Display
LCD 1 FIRMWARE UPDATE is displayed.
LCD 2 displays the type of firmware (for example, SYSTEM).
• SYSTEM: Controller firmware
LCD 2 • BOOT: Boot firmware
• RESOURCE: Resource file
• CONFIGURATION: Equipment configuration file
LCD 3 Progress of the update is displayed (for example, 90%).
LCD 4 No display
Firmware update
Type of firmware
Progress
D. Warning
• This message is displayed when the print is available but some user manipulation(s) are
required. The control panel displays the following description for warning.
Display
LCD 1 Print mode is displayed and warning icon is displayed on the right (for example, READY).
LCD 2
Warning message is displayed (for example, TONER LOW).
LCD 3
Key guidance is displayed.
LCD 4
(for example,
State
Warning message
Key guidance
76
Description
FIRMWARE UPDATE
SYSTEM
90%
Description
for help: By pressing the down key
READY

TONER LOW

for help

Field Service Ver. 1.0 Nov. 2007
A0DXF3E513DA
, the screen displays the help screen)
Warning icon
A0DXF3E514DA