9. Menu
9.8.12
HDD FORMAT
Function
• Initializes the format of the optional hard disk kit.
• To initialize the format of the optional hard disk kit.
Use
USER AREA ONLY : Initialize only user area
ALL
Setting
1. Select [HDD FORMAT] and press the Menu/Select key.
/procedure
2. Select desired initialization method and press the Menu/Select key.
3. [ARE YOU SURE?] is displayed.
4. By pressing the Menu/Select key, initialization starts. By pressing the Cancel key
without pressing the Menu/Select key, the start of initialization can be cancelled.
5. The printer restarts and the hard disk is initialized. Once the initialization starts, it
cannot be cancelled.
• The default setting is USER AREA ONLY.
NOTE
• This menu is available only when an optional hard disk kit is installed.
9.8.13
CARD FORMAT
Function
• Initializes the format of the optional compact flash card.
• To initialize the format of the optional compact flash card.
Use
USER AREA ONLY : Initialize only user area
ALL
Setting
1. Select [CARD FORMAT] and press the Menu/Select key.
/procedure
2. Select desired initialization method and press the Menu/Select key.
3. [ARE YOU SURE?] is displayed.
4. By pressing the Menu/Select key, initialization starts. By pressing the Cancel key
without pressing the Menu/Select key, the start of initialization can be cancelled.
5. The printer restarts and the hard disk is initialized. Once the initialization starts, it
cannot be cancelled.
• The default setting is USER AREA ONLY.
NOTE
• This menu is available only when an optional compact flash card is installed.
122
: Initialize all area
USER AREA ONLY
: Initialize all area
USER AREA ONLY
Field Service Ver. 1.0 Nov. 2007
ALL
ALL